Skip to content
CYT Hydraulic B2B Hydraulic Fittings Manufacturer and Supplier

Article ยท October 19, 2026

Ferrule Selection: Match the Ferrule to the Hose First

A crimp ferrule is chosen by the hose it grips. Confirming the hose first prevents most mismatches.

The ferrule is the part of a crimped assembly that grips the hose. It is selected by the hose it is crimped onto, and keeping that order of decisions prevents most mismatches.

Why the hose decides

The crimp dimensions of a ferrule correspond to a hose family and size. Choosing the fitting end first and adapting the ferrule afterwards is where assemblies start to disagree with their own specification.

Crimping information to keep

  • Hose designation and inside diameter.
  • Ferrule designation recorded with the hose line.
  • Crimped outside diameter as recorded on the crimping equipment.
Crimped hose end showing the ferrule and a caliper reading
Photo brief 400 × 300 — crimped end with the recorded crimp diameter.

What to confirm before ordering

  1. Hose designation and size.
  2. Ferrule designation that matches it.
  3. Quantity, and whether the assembly is supplied crimped or as parts.

Send the hose designation with your inquiry and we will quote the matching ferrule against it.

All articles

A question this note does not answer

Send the part number, the thread or a photograph. Identification comes before price, and both come back in the same reply.