Metric or Inch: A Practical Method for Sorting Unknown Threads
Sorting an unknown thread into metric or inch first makes every later check faster. Two measurements decide it.
Read the noteArticles
Practical notes on identifying fittings, reading threads and sizes, and preparing a list that can be quoted without a round of questions.
11 articles
Sorting an unknown thread into metric or inch first makes every later check faster. Two measurements decide it.
Read the noteA custom fitting quote is only as complete as its interface description. Five items make a request quotable.
Read the noteAn O-ring close enough to assemble will not necessarily stay sealed under pressure. Measure inside diameter and cord thickness without stretching the ring.
Read the noteMost leaks at a fitting come from the sealing surface, the assembly, or the specification. A fixed check order separates them.
Read the noteAssemblies are quoted to the fitting end or to the seating face. A length without its convention sits wrong on the machine.
Read the noteA hose line is more than a diameter and a length. These are the fields that decide which hose is being asked for.
Read the noteTwo common hydraulic sealing styles look alike from the outside. The seat tells you which one you have.
Read the noteFour photographs and a short measurement list usually get a faster answer than a long written description.
Read the noteA parallel thread and a tapered thread can share a nominal size and still not be the same part. Here is how to tell them apart.
Read the noteA crimp ferrule is chosen by the hose it grips. Confirming the hose first prevents most mismatches.
Read the noteA quick method for telling JIC, BSP, NPT and ORFS threads apart before you send an inquiry.
Read the noteSend the part number, the thread or a photograph. Identification comes before price, and both come back in the same reply.