Article · October 19, 2026
Measuring Hydraulic Hose Assembly Length: Which Two Points Count
Assemblies are quoted to the fitting end or to the seating face. A length without its convention sits wrong on the machine.
Hose assembly length is measured, not guessed — and the measuring convention has to match how the assembly is built. A length taken between the wrong two points produces a hose that looks right on paper and sits wrong on the machine.
The two points that define a length
Assemblies are quoted either to the end of the fitting or to the seating face. Both conventions exist; they differ by roughly the length of the fitting ends, which is enough to matter on a tight run.
How to measure
- Lay the assembly out straight, without tension.
- Run the tape along the hose, not along a chord across a bend.
- Record which convention the number follows.
What to include with the order line
- Length, with the measuring convention stated.
- End fitting at each end, identified by thread and seat.
- Whether the run is fixed or moves in service — a moving run needs clearance, not just length.
State the convention with the number and the assembly can be built and checked against the same reference points.
A question this note does not answer
Send the part number, the thread or a photograph. Identification comes before price, and both come back in the same reply.