1C/1D DIN Bite Type-Straight Fitting
Series 1C/1D · 20 sizes · 6–42 mm (1C), 6–38 mm (1D)
Straight DIN bite-type tube fitting on a metric stud thread, for 6–42 mm tube in light series 1C and heavy series 1D.
Key specifications
- Thread
- M12×1.5 – M52×2
- Tube O.D.
- 6–42 mm (1C), 6–38 mm (1D)
- Seal
- Bite-type cutting ring, 24° cone at the threaded ends
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
- Standard
- DIN 2353 bite-type tube fitting
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Factory-direct OEM customization Exported to 40+ countries Reply within 1 business day
Specifications
Dimensions in millimetres, pressure in MPa.
Tick the sizes you need and set quantities — they go into one inquiry list.
| Part no. | Thread | Tube O.D. | I1 | L1 | S1 | S2 | S3 | Pressure | Qty | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1C — Light series (L) | ||||||||||
| 1C-12 | M12×1.5 | 6 mm | 10 | 39 | 12 | 14 | 14 | 31.5 MPa | ||
| 1C-14 | M14×1.5 | 8 mm | 11 | 40 | 14 | 17 | 17 | 31.5 MPa | ||
| 1C-16 | M16×1.5 | 10 mm | 13 | 42 | 17 | 19 | 19 | 31.5 MPa | ||
| 1C-18 | M18×1.5 | 12 mm | 14 | 43 | 19 | 22 | 22 | 31.5 MPa | ||
| 1C-22 | M22×1.5 | 15 mm | 16 | 46 | 24 | 27 | 27 | 31.5 MPa | ||
| 1C-26 | M26×1.5 | 18 mm | 16 | 48 | 27 | 32 | 32 | 31.5 MPa | ||
| 1C-30 | M30×2 | 22 mm | 20 | 52 | 32 | 36 | 36 | 16 MPa | ||
| 1C-36 | M36×2 | 28 mm | 21 | 54 | 41 | 41 | 41 | 16 MPa | ||
| 1C-45 | M45×2 | 35 mm | 20 | 63 | 46 | 50 | 50 | 16 MPa | ||
| 1C-52 | M52×2 | 42 mm | 21 | 66 | 55 | 60 | 60 | 16 MPa | ||
| 1D — Heavy series (S) | ||||||||||
| 1D-14 | M14×1.5 | 6 mm | 16 | 45 | 14 | 17 | 17 | 63 MPa | ||
| 1D-16 | M16×1.5 | 8 mm | 18 | 47 | 17 | 19 | 19 | 63 MPa | ||
| 1D-18 | M18×1.5 | 10 mm | 17 | 49 | 19 | 22 | 22 | 63 MPa | ||
| 1D-20 | M20×1.5 | 12 mm | 19 | 51 | 22 | 24 | 24 | 63 MPa | ||
| 1D-22 | M22×1.5 | 14 mm | 22 | 57 | 24 | 27 | 27 | 63 MPa | ||
| 1D-24 | M24×1.5 | 16 mm | 21 | 57 | 27 | 30 | 30 | 63 MPa | ||
| 1D-30 | M30×2 | 20 mm | 23 | 66 | 32 | 36 | 36 | 40 MPa | ||
| 1D-36 | M36×2 | 25 mm | 26 | 74 | 41 | 46 | 46 | 40 MPa | ||
| 1D-42 | M42×2 | 30 mm | 27 | 80 | 46 | 50 | 50 | 40 MPa | ||
| 1D-52 | M52×2 | 38 mm | 29 | 90 | 55 | 60 | 60 | 31.5 MPa | ||
Pressure values are the working pressure for the tube side. Confirm tube wall thickness and application before ordering.
Ordering notes
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Example part number 1C-12 (light series) / 1D-14 (heavy series)
Lead time and freight are confirmed against stock and schedule before an order is accepted. Payment terms above are the usual T/T arrangement; platform and letter-of-credit orders are confirmed order by order.
Compatibility & application
Each threaded end seals on its 24° cone against the mating part, and the cutting ring bites into the tube wall. Series 1C and 1D share the body; 1D has thicker walls and carries the higher pressure band, so compare the MPa column with the working pressure of your line.
- Compatible tube
- 6–42 mm (1C), 6–38 mm (1D)
- Mating end
- Metric male stud ends E and F, 24° cone, with cutting ring and nut
- Working pressure
- 31.5 / 16 MPa (1C); 63 / 40 / 31.5 MPa (1D) — see the table for the size band
- Confirm before order
- State the tube outer diameter and the thread when enquiring — the fitting is matched to both.
Material & quality
Machining and inspection are carried out in our own plant; plating is out of house, at a contracted finisher, and checked before packing. Stainless steel 304 and 316 are supplied on request and confirmed order by order.
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
FAQ
What is a DIN bite-type tube fitting?
A tube fitting to DIN 2353. The tube end is cut square and deburred; the cutting ring is compressed onto the tube as the nut is tightened, and the 24° cone seals against the mating stud. No welding or flaring is needed.
Which series do I need, 1C or 1D?
1C is the light series (L) for 6–42 mm tube and 1D the heavy series (S) for 6–38 mm tube. The table prints the pressure band of every size, so compare that band with the working pressure of the line.
What does the RN suffix mean?
Adding RN to the part number orders the complete set with cutting ring and nut, e.g. 1C9-30RN as the catalogue prints it. Without the suffix the fitting is supplied without them.
Do the digits give the tube size or the thread?
The thread. 1C-12 is an M12×1.5 stud thread for 6 mm tube; the tube outer diameters are the D1 and D2 columns of the table.
Send this inquiry list
Selected sizes are listed below. Add your destination country and any drawing reference — one email, one quote.
No sizes selected yet — tick them in the table above.
Quantities are set in the specification table above: tick a row there and type how many. Any quantity can still be changed until you send.