2B BSP Male Double-Use / BSP Female 60° Cone Fitting
Series 2B · 25 sizes · L 25 – 63.5 mm
Straight fitting with a BSP male double-use stud on one end — 60° cone seat, or a bonded seal against the hex — and a BSP female 60° cone on the other, G1/8×28 to G2×11.
Key specifications
- Thread
- G1/8×28 – G2×11
- Size range
- L 25 – 63.5 mm
- Seal
- 60° cone seat or a bonded seal against the hex face on the male end; 60° cone socket on the female end
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Factory-direct OEM customization Exported to 40+ countries Reply within 1 business day
Specifications
All dimensions are in millimetres.
Tick the sizes you need and set quantities — they go into one inquiry list.
| Part no. | ThreadE | ThreadF | A | B | L | S1 | S2 | Qty | |
|---|---|---|---|---|---|---|---|---|---|
| 2B-02 | G1/8×28 | 10 | 5.5 | 25 | 14 | 14 | |||
| 2B-02-04 | G1/8×28 | G1/4×19 | 10 | 5.5 | 27 | 14 | 19 | ||
| 2B-04 | G1/4×19 | 12 | 5.5 | 29 | 19 | 19 | |||
| 2B-04-06 | G1/4×19 | G3/8×19 | 12 | 6.3 | 30.5 | 19 | 22 | ||
| 2B-04-08 | G1/4×19 | G1/2×14 | 12 | 7.5 | 32 | 19 | 27 | ||
| 2B-06 | G3/8×19 | 13.5 | 6.3 | 34 | 22 | 22 | |||
| 2B-06-08 | G3/8×19 | G1/2×14 | 13.5 | 7.5 | 35.5 | 22 | 27 | ||
| 2B-06-10 | G3/8×19 | G5/8×14 | 13.5 | 9.5 | 36 | 22 | 30 | ||
| 2B-08 | G1/2×14 | 16 | 7.5 | 40 | 27 | 27 | |||
| 2B-08-06 | G1/2×14 | G3/8×19 | 16 | 6.3 | 38.5 | 27 | 22 | ||
| 2B-08-12 | G1/2×14 | G3/4×14 | 16 | 10.9 | 41 | 27 | 32 | ||
| 2B-10 | G5/8×14 | 17.5 | 9.5 | 42 | 30 | 30 | |||
| 2B-10-08 | G5/8×14 | G1/2×14 | 18 | 7.5 | 41.5 | 30 | 27 | ||
| 2B-10-12 | G5/8×14 | G3/4×14 | 17.5 | 10.9 | 42.5 | 30 | 32 | ||
| 2B-12 | G3/4×14 | 18.5 | 10.9 | 44.5 | 32 | 32 | |||
| 2B-12-10 | G3/4×14 | G5/8×14 | 18.5 | 9.5 | 44 | 32 | 30 | ||
| 2B-12-16 | G3/4×14 | G1×11 | 18.5 | 11.7 | 46 | 32 | 41 | ||
| 2B-16 | G1×11 | 20.5 | 11.7 | 50 | 41 | 41 | |||
| 2B-16-12 | G1×11 | G3/4×14 | 20.5 | 10.9 | 48 | 41 | 32 | ||
| 2B-16-20 | G1×11 | G1 1/4×11 | 20.5 | 11 | 53 | 41 | 50 | ||
| 2B-20 | G1 1/4×11 | 20.5 | 11 | 55 | 50 | 50 | |||
| 2B-20-16 | G1 1/4×11 | G1×11 | 20.5 | 11.7 | 52 | 50 | 41 | ||
| 2B-20-24 | G1 1/4×11 | G1 1/2×11 | 20.5 | 13 | 55.5 | 50 | 55 | ||
| 2B-24 | G1 1/2×11 | 23 | 13 | 58 | 55 | 55 | |||
| 2B-32 | G2×11 | 25.5 | 16 | 63.5 | 70 | 70 | |||
Ordering notes
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Example part number 2B-08 (G1/2 both ends) / 2B-16-20 (G1 · G1 1/4)
Lead time and freight are confirmed against stock and schedule before an order is accepted. Payment terms above are the usual T/T arrangement; platform and letter-of-credit orders are confirmed order by order.
Compatibility & application
Series 2B joins a male double-use stud to a female 60° cone socket in a straight body. The male end seals either on the 60° cone seat of the mating part or, with a bonded seal, on the flat face of the hex; the female end takes a male 60° cone stud. One part number therefore adapts between a cone-seat port and a stud-ended line without a second adaptor.
A plain size carries the same thread at both ends — 2B-08 is G1/2×14 both ends. A combination size steps: 2B-16-20 runs G1×11 at E and G1 1/4×11 at F. The drawing measures A as the male end length, B as the hex length, L as the overall length, and S1 and S2 as the two hexes across flats.
The series runs from 2B-02 at G1/8 to 2B-32 at G2, 25 part numbers in all.
- Size range
- L 25 – 63.5 mm
- Mating end
- BSP female 60° cone seat on the male end; BSP male 60° cone stud on the female end
- Working pressure
- Confirm per assembly data
- Confirm before order
- State which end seals on the 60° cone and which on a bonded seal, and both thread sizes.
Material & quality
Machining and inspection are carried out in our own plant; plating is out of house, at a contracted finisher, and checked before packing. Stainless steel 304 and 316 are supplied on request and confirmed order by order.
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
FAQ
What does "double use" mean on the male end?
The catalogue describes series 2B as BSP male double use for 60° cone seat or bonded seal on the male end. That end seals on the 60° cone of the mating part, or — with a bonded seal — on the flat face of the hex, so one fitting takes either a cone-seat port or a bonded-seal port. The other end is a female 60° cone socket that takes a male stud.
What do A, B, L, S1 and S2 measure on the drawing?
A is the length of the male end, B the length of the hex section, L the overall length, and S1 and S2 the two hexes across flats — S1 on the male end and S2 on the female end. All figures are in millimetres and catalogue page 67 prints them against every part number.
Can it step between two sizes?
Yes. 2B-08-06 runs G1/2×14 at E and G3/8×19 at F, so a G1/2 male end lands in a G3/8 female socket. On a plain size such as 2B-08 both ends read G1/2×14.
What working pressure does it take?
Catalogue page 67 prints threads and dimensions for series 2B, with no pressure band. Tell us the assembly and the pressure it runs at and we confirm the fitting against it before order.
Related series
Send this inquiry list
Selected sizes are listed below. Add your destination country and any drawing reference — one email, one quote.
No sizes selected yet — tick them in the table above.
Quantities are set in the specification table above: tick a row there and type how many. Any quantity can still be changed until you send.