4B BSP Male Double-Use 60° Cone Seat or Bonded Seal Plug
Series 4B · 10 sizes · L 16 – 43.5 mm
Hex plug with a BSP male 60° cone seat — it seals on the cone or, with a bonded seal, on the face of the hex — G1/8×28 to G2×11, closing a port.
Key specifications
- Thread
- G1/8×28 – G2×11
- Size range
- L 16 – 43.5 mm
- Seal
- 60° cone seat, or a bonded seal against the face of the hex
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Factory-direct OEM customization Exported to 40+ countries Reply within 1 business day
Specifications
All dimensions are in millimetres.
Tick the sizes you need and set quantities — they go into one inquiry list.
| Part no. | Thread | A | L | S1 | Qty | |
|---|---|---|---|---|---|---|
| 4B-02 | G1/8×28 | 10 | 16 | 14 | ||
| 4B-04 | G1/4×19 | 12 | 18 | 19 | ||
| 4B-06 | G3/8×19 | 13.5 | 21.5 | 22 | ||
| 4B-08 | G1/2×14 | 16 | 26 | 27 | ||
| 4B-10 | G5/8×14 | 17.5 | 27.5 | 30 | ||
| 4B-12 | G3/4×14 | 18.5 | 29.5 | 32 | ||
| 4B-16 | G1×11 | 20.5 | 34 | 41 | ||
| 4B-20 | G1 1/4×11 | 20.5 | 37.5 | 50 | ||
| 4B-24 | G1 1/2×11 | 23 | 40 | 55 | ||
| 4B-32 | G2×11 | 25.5 | 43.5 | 70 |
Ordering notes
- Stock
- Confirm per order
- Minimum
- Confirm per order
- Lead time
- Confirm per order
- Payment
- Confirm per order
Example part number 4B-08 (G1/2 plug)
Lead time and freight are confirmed against stock and schedule before an order is accepted. Payment terms above are the usual T/T arrangement; platform and letter-of-credit orders are confirmed order by order.
Compatibility & application
Series 4B is a hex plug for a BSP port. The body carries one male thread with a 60° cone at its nose, made for double use: the joint seals either on the 60° cone seat of the port or, with a bonded seal, on the flat face of the hex. The same part number therefore closes a cone-seat port or a bonded-seal port.
The plug has a single threaded end, so the table prints one thread column. The drawing measures A as the hex length, L as the overall length, S1 as the hex across flats, and w as the width of the conical seat.
The series runs from 4B-02 at G1/8 to 4B-32 at G2, 10 part numbers in all.
- Size range
- L 16 – 43.5 mm
- Mating end
- BSP female 60° cone port
- Working pressure
- Confirm per assembly data
- Confirm before order
- State the port size and whether it seals on the 60° cone or on a bonded seal against the hex.
Material & quality
Machining and inspection are carried out in our own plant; plating is out of house, at a contracted finisher, and checked before packing. Stainless steel 304 and 316 are supplied on request and confirmed order by order.
- Material
- Carbon Steel / Stainless Steel (-SS)
- Plating
- Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
FAQ
What is a 4B plug for?
It closes a port that would otherwise take a BSP male 60° cone stud. The plug has one male thread; it seals on the 60° cone seat of the port, or — with a bonded seal — on the flat face of its own hex.
Why does this table show one thread column instead of two?
Because the plug has one threaded end, not two. Catalogue page 76 prints a single THREAD column for series 4B, where a fitting with an end at each side gets E and F columns. The E column here is the plug's only thread.
What do A, L, S1 and w measure?
A is the length of the hex section, L the overall length, S1 the hex across flats and w the width of the conical seat. All figures are in millimetres and page 76 prints them against every part number.
What working pressure does it take?
Catalogue page 76 prints threads and dimensions for series 4B, with no pressure band. Tell us the port and the pressure it runs at and we confirm the plug against it before order.
Related series
Send this inquiry list
Selected sizes are listed below. Add your destination country and any drawing reference — one email, one quote.
No sizes selected yet — tick them in the table above.
Quantities are set in the specification table above: tick a row there and type how many. Any quantity can still be changed until you send.