Skip to content
CYT Hydraulic B2B Hydraulic Fittings Manufacturer and Supplier
Product photo 1200 × 1200 · 1:1 · white background

2B9 90° Elbow BSP Male 60° Seat / BSP Female 60° Cone Fitting

Series 2B9 · 14 sizes · A 19.8 – 72.5 mm

90° elbow with a BSP male 60° seat stud on one leg and a BSP female 60° cone socket on the other, G1/8×28 to G2×11, turning a run at a port.

Key specifications

Thread
G1/8×28 – G2×11
Size range
A 19.8 – 72.5 mm
Seal
60° cone seat on the male leg; 60° cone socket on the female leg
Material
Carbon Steel / Stainless Steel (-SS)
Plating
Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)
Stock
Confirm per order
Minimum
Confirm per order
Lead time
Confirm per order
Payment
Confirm per order

Hydraulic Adapters · BSPP · 2B9

Factory-direct OEM customization Exported to 40+ countries Reply within 1 business day

Specifications

All dimensions are in millimetres.

Tick the sizes you need and set quantities — they go into one inquiry list.

Part no. ThreadE ThreadF A B S1 S2 Qty
2B9-02 G1/8×28 19.8 5.5 11 14
2B9-04 G1/4×19 24.5 5.5 14 19
2B9-04-06 G1/4×19 G3/8×19 25 6.3 14 22
2B9-06 G3/8×19 27.5 6.3 16 22
2B9-06-04 G3/8×19 G1/4×19 27.5 5.5 16 19
2B9-08 G1/2×14 34.5 7.5 22 27
2B9-08-06 G1/2×14 G3/8×19 34.5 6.3 22 19
2B9-10 G5/8×14 35 9.5 22 30
2B9-10-08 G5/8×14 G1/2×14 35 7.5 22 27
2B9-12 G3/4×14 40 10.9 27 32
2B9-16 G1×11 46 11.7 33 41
2B9-20 G1 1/4×11 50.5 11 41 50
2B9-24 G1 1/2×11 57.5 13 48 55
2B9-32 G2×11 72.5 16 63 70
Ordering notes
Stock
Confirm per order
Minimum
Confirm per order
Lead time
Confirm per order
Payment
Confirm per order

Example part number 2B9-08 (G1/2 both ends) / 2B9-08-06 (G1/2 · G3/8)

Lead time and freight are confirmed against stock and schedule before an order is accepted. Payment terms above are the usual T/T arrangement; platform and letter-of-credit orders are confirmed order by order.

Compatibility & application

Series 2B9 turns the 2B joint through 90°. One leg carries a BSP male stud with a 60° seat, the other a BSP female 60° cone socket, so a line can leave a port and turn along the manifold face without a separate elbow and adaptor in the run.

The male leg seals on the 60° cone of the mating part; the female leg takes a male 60° cone stud. A plain size carries the same thread at both ends — 2B9-08 is G1/2×14 both ends. A combination size steps: 2B9-08-06 runs G1/2×14 at E and G3/8×19 at F. The drawing measures A as the horizontal leg, B as the vertical leg, and S1 and S2 as the two hexes across flats.

The series runs from 2B9-02 at G1/8 to 2B9-32 at G2, 14 part numbers in all.

Size range
A 19.8 – 72.5 mm
Mating end
BSP female 60° cone seat on the male leg; BSP male 60° cone stud on the female leg
Working pressure
Confirm per assembly data
Confirm before order
State which leg faces the port, both thread sizes, and the two hexes you have wrench room for.

Material & quality

Machining and inspection are carried out in our own plant; plating is out of house, at a contracted finisher, and checked before packing. Stainless steel 304 and 316 are supplied on request and confirmed order by order.

Material
Carbon Steel / Stainless Steel (-SS)
Plating
Cr3+ Trivalent Zinc Plating (96h+ Salt Spray)

FAQ

How does 2B9 differ from 2B?

2B is the straight version: male double-use end and female 60° cone end in line. 2B9 is the same joint turned through 90°, so a male 60° seat stud leaves the port on one leg and the female socket faces along the other. The thread sizes are the same set — 2B9-08 is G1/2×14 on both ends, as 2B-08 is.

Why is there no L column in this table?

Catalogue page 68 prints A and B — the two legs, measured from the thread faces — and the two hex sizes S1 and S2. A single overall length is not printed for this series; quote A, B and the two sizes and we confirm the part against your drawing.

Which end is male and which is female?

E is the male 60° seat end and F is the female 60° cone socket. On 2B9-08-06, E is G1/2×14 and F is G3/8×19; on a plain size such as 2B9-12 both read G3/4×14.

What working pressure does it take?

Catalogue page 68 prints threads and dimensions for series 2B9, with no pressure band. Tell us the assembly and the pressure it runs at and we confirm the elbow against it before order.

Related series

Send this inquiry list

Selected sizes are listed below. Add your destination country and any drawing reference — one email, one quote.

No sizes selected yet — tick them in the table above.

Quantities are set in the specification table above: tick a row there and type how many. Any quantity can still be changed until you send.