Crimp Fitting for One-Wire Hose — JIC Female 74° Cone

For one-wire braid hose assemblies in mobile and industrial hydraulic circuits. The interface side is JIC (UN/UNF thread, 37° cone). Confirm hose series, crimp diameter and the mating half's thread and cone before ordering; when the mating part is not a standard JIC end, send its drawing.

Sample record — placeholder data for layout testing; replace with verified product information before launch.

A crimped hose fitting for one-wire braid hydraulic hose, with a JIC female 74° cone on the equipment side. The hose end is prepared to the hose manufacturer’s data; the interface end seals on the 37° flare cone.

Crimped or reusable fittings that terminate a hydraulic hose assembly — the end that screws into the pump, valve or cylinder. CYT Hydraulic supplies the common straight and elbow forms across the usual interface systems, so an assembler can match one supplier to most of an order instead of splitting it.

Selection notes

Confirm the hose end first (hose series, DN and the crimp dimensions from the hose manufacturer's data), then the interface end (system, thread size, and whether it seals on a cone, a 24° seat or a bonded face). Check the fitting's working pressure against the assembly, not against the hose alone, and send the mating half's drawing when it is not a standard part.