NPT Male Pipe Fitting — 90° Elbow
Product images and drawings
Compatibility & application
NPT male taper thread. Check the nominal size against the actual thread — NPT sizes do not correspond to the measured diameter. Use a sealant or PTFE tape rated for the fluid, and torque to specification rather than past it. NPT and BSPT will not seal together correctly even when the size reads the same.
Sample record — placeholder data for layout testing; replace with verified product information before launch.
A 90° elbow with an NPT male pipe thread, for routing a hydraulic line where a straight connection will not fit.
Specifications
| Model / Spec | Interface | Thread | Dimensions | Seal | Material |
|---|---|---|---|---|---|
| NPT-E90-04 | NPT male, 90° elbow | 1/8-27 NPT | DN06 | Taper thread | Carbon steel |
| NPT-E90-08 | NPT male, 90° elbow | 1/2-14 NPT | DN12 | Taper thread | Carbon steel |
| NPT-E90-12 | NPT male, 90° elbow | 3/4-14 NPT | DN20 | Taper thread | Carbon steel |
Categories & fitting standards
Hydraulic Hose Fittings
Crimped or reusable fittings that terminate a hydraulic hose assembly — the end that screws into the pump, valve or cylinder. CYT Hydraulic supplies the common straight and elbow forms across the usual interface systems, so an assembler can match one supplier to most of an order instead of splitting it.
Selection notes
Confirm the hose end first (hose series, DN and the crimp dimensions from the hose manufacturer's data), then the interface end (system, thread size, and whether it seals on a cone, a 24° seat or a bonded face). Check the fitting's working pressure against the assembly, not against the hose alone, and send the mating half's drawing when it is not a standard part.