Two-Wire Braid Hose Ferrule — 00110 Series
Product images and drawings
Compatibility & application
For two-wire braid hose assemblies. Skive and no-skive variants are matched to the hose's layer construction — using the wrong variant is a common cause of blow-off. The crimp diameter and die set come from this ferrule and the hose data. If the hose is unbranded or its construction is unknown, send a cross-section of the hose end first.
Sample record — placeholder data for layout testing; replace with verified product information before launch.
The sleeve crimped over hose and inserted fitting to lock a hose assembly together. This series is for two-wire braid hose and is matched to the hose construction, not to the fitting alone.
Specifications
| Model / Spec | Interface | Thread | Dimensions | Seal | Material |
|---|---|---|---|---|---|
| 00110-06 | — | — | DN10 | — | Carbon steel |
| 00110-08 | — | — | DN12 | — | Carbon steel |
| 00110-12 | — | — | DN20 | — | Carbon steel |
Categories & fitting standards
Hydraulic Ferrules
The sleeve crimped over the hose and the inserted fitting to lock the assembly together. Hydraulic ferrules are matched to a hose series and to the fitting's skive type, so they are specified by combination rather than by appearance — wrong pairing is the most common cause of a blow-off.
Selection notes
Match the hydraulic ferrule to the hose's nominal diameter and series, and to skive or no-skive hose construction. The crimp diameter and die set come from the ferrule and hose data, not from the fitting. When the hose is unbranded or the layer construction is unknown, send a cross-section of the hose end before ordering.